KLayout Manual: Main Index » Programming scripts » Observers, Events And Callbacks

Observers, Events And Callbacks

Introduction

In some places, the API requires to attach code to an event. An event could be a menu item which is selected or a change of some status which might require some action. This could also be a request for some information which on the specific implementation can provide. The API allows implementation of specific code which is called in that case. This enables us to implement initialisation functionality for example or the functionality behind a menu item. In this text we will refer to such functionality by the general term "callback". In general a callback is custom code that is called from the API in contrast to API code that is called from the custom code.

There are basically three ways to attach specific code to a callback:

  • Reimplementation (Strategy Pattern): some API classes provide "virtual" methods. "virtual" is a C++ term and means a method that can be overridden in a derived class. This technique is employed for example in the "Strategy" design pattern. In strictly typed C++ this is quite a common pattern which allows definition of interfaces and concrete implementations based on those interfaces. Ruby as a dynamic language doesn't care much about classes and their relationship: an object either has a method or it hasn't. So, reimplementation is just a matter of providing the right method. An examples for the strategy pattern is the BrowserSource class (BrowserSource).
  • Observer: some API classes provide the ability to attach observers to concrete events. Observers are separate objects that implement the Observer interface. They must provide a method called "signal" or "signal_int". When the event occures, either one or both of these methods is called, depending on the nature of the event. This "Observer" design pattern uses the reimplementation technique to actually implement the functionality. In contrast to the reimplementation technique, the observer pattern allows attaching multiple receivers to one event. Implementor classes of the observers however can only handle one kind of event. An example for using observers is the LayoutView class (LayoutView) which provides some events usings observers (i.e. "add_cell_visibility_observer/remove_cell_visibility_observer").
  • Events: events are basically an easy and more flexible way to implement observers. Observers are somewhat restriced because the callback interface is fixed to a certain signature (no parameter or one integer parameter for example). Also, it is sometimes somewhat tedious to implement observers because new objects or classes are involved. In contrast to C++, with blocks or lambdas, Ruby offers a very convenient way to provide specific code for a certain event. That is the idea behind KLayout's events: instead of implementing an observer simply attach a block to an event. The drawback of that approach is that it is not possible to attach multiple blocks to a certain event. An example for events is the Action class (Action) which provides both the reimplementation interface ("triggered" method) and the event interface ("on_triggered"). By the way, Qt signals are mapped to events in KLayout's Qt binding (The Qt Binding).

Reimplementation (Strategy Pattern)

The BrowserSource (BrowserSource) class is a nice example for the Strategy pattern. It is used by the BrowserDialog class (BrowserDialog) as a kind of internal HTML server which handles URL's starting with "int:". For this, a script has to provide a class that reimplements the "get(url)" method. In the following example, a BrowserSource is created that takes an URL with an integer index number and delivers a HTML text with a link to the URL with the next index.

Here is the code: 

module MyMacro
  
  include RBA
  
  class MyBrowserSource < BrowserSource
    def get(url)
      next_url = url.sub(/\d+/) { |num| (num.to_i+1).to_s }
      "This is #{url}. <a href='#{next_url}'>Goto next (#{next_url})</a>"
    end
  end
  
  dialog = BrowserDialog::new
  dialog.source = MyBrowserSource::new
  dialog.home = "int:0"
  dialog.exec

end

This example demonstrates how the "get" method is reimplemented to deliver the actual text. Ruby even allows reimplementation of a method without deriving a new class, because it allows to define methods per instance: 

module MyMacro
  
  include RBA
  
  source = BrowserSource::new
  def source.get(url)
    next_url = url.sub(/\d+/) { |num| (num.to_i+1).to_s }
    "This is #{url}. <a href='#{next_url}'>Goto next (#{next_url})</a>"
  end
  
  dialog = BrowserDialog::new
  dialog.source = source
  dialog.home = "int:0"
  dialog.exec

end

Observer

Using the Observer pattern requires an additional object. Again reimplementation allows attaching custom functionality to the callback. In contrast to the Strategy pattern, the interface is very generic and can supply only few parameters, if there are parameters at all.

An observer is an object of a class derived from the Observer class (Observer). An example for a use case for the Observer is the LayoutView class (LayoutView). This class offers multiple events that indicate certain conditions. Here is some code: 

module MyMacro
  
  include RBA
  
  class MyObserver < Observer
    def signal 
      Application::instance.main_window.message("Selection changed", 1000)
    end
  end
  
  observer = MyObserver::new
  Application::instance.main_window.current_view.add_selection_changed_observer(observer)  
  
end

In this example, an observer is created and attached to the "selection_changed" event of LayoutView using "add_selection_changed_observer". When the selection changes, the "signal" method of the observer is called. By reimplementing that method we show a short message in the MainWindow's status bar.

Because Ruby is a dynamic language and allows overriding of methods per instance, we can simplify the example further which avoids having to create a new class: 

module MyMacro
  
  include RBA
  
  observer = MyObserver::new
  def observer.signal
    Application::instance.main_window.message("Selection changed", 1000)
  end

  Application::instance.main_window.current_view.add_selection_changed_observer(observer)  
  
end

Events

Events are the callback variant that is the easiest one to use. Using an event it is possible to directly attach a block of code to a callback. An event has a specific signature, i.e. the parameters it provides. The block can obtain this parameters by listing them in it's argument list.

Here is a simple example that uses the parameterless "on_triggered" event of the Action class (Action). It puts a new entry into the tool bar and if it is clicked, it displays a message box: 

module MyMacro
  
  include RBA
  
  action = Action::new
  action.on_triggered do
    MessageBox::info("A message", "The action was triggered", MessageBox::Ok)
  end
  action.title = "My Action"
  
  Application::instance.main_window.menu.insert_item("@toolbar.end", "my_action", action)
  
end

If the Qt binding is available (see The Qt Binding), Qt signals are available as events which simplifies the implementation of a Qt dialog. In this example, the "textChanged" signal of QLineEdit is attached a code block which copies the text of the input field to the label below: 

module MyMacro
  
  include RBA
  
  dialog = QDialog::new(Application::instance.main_window)
  layout = QVBoxLayout::new(dialog)
  input = QLineEdit::new(dialog)
  label = QLabel::new(dialog)
  layout.addWidget(input)
  layout.addWidget(label)

  # implement the textChanged signal as event:
  input.textChanged { |text| label.text = text }

end

Please note that unlike Qt signal/slots, this technique does not allow to attach multiple handlers to one event/signal.