CMeyer
About
- Username
- CMeyer
- Joined
- Visits
- 118
- Last Active
- Roles
- Member
Comments
-
But I wish know why I need to " connect_implicit (V_ss ) "
-
(Image) It works !
-
(Image) But the thing i don't understand, the label $6 normally is called B for the other pin name the name is correct. Do you think the problem come from here ? This is the extracted netlist
-
(Image) Sorry I show you the extracted netlist not refresh. In this case there are no problems with V_ss but I don't understand the LVS result.
-
(Image) Okay, I think I've found where the issue comes from. I took a screenshot of the extracted netlist, and the subcircuit is detected, but I don't know why the net $9 replaces V_ss in some places but not everywhere. I believe the problem is o…
-
There is a problem with V_ss, and I don't know why, whereas V_dd is okay.
-
(Image) I've been trying to fix this error since yesterday, but nothing has changed. Could you help me understand what is happening? Thanks
-
Okay, the issue is not with my cell, but at the top level. It is good news. I'm trying to solve these issues in subcells, and I'm becoming crazy.
-
(Image) Thanks it's working, it will be the mess with all my companants but it works. ;)
-
(Image) when I put all my gds files in "libraries" its work but only with one component
-
(Image) I did this but it doesn't work, I tried many other combinations. Can you give me a real exemple ? thanks kinds regards
-
-- deleted --
-
I tried putting all my GDS files in "~/.klayout/libraries," but I can only use one GDS file. When I attempt to place these files in subdirectories, nothing seems to work. I must have overlooked something, but I don't know what it is.
-
Okay, I saw that it explains where I need to install my libraries, which is in "~/.klayout/libraries". But the main question is: How do I install a library?
-
Another problem I encounter with the pin is that capital letters written in lowercase affect the pin (not the netlist).
-
And this is the result of my LVS : (Image) all is green B)
-
This is my netlist I use :smile: (Image) "The X needs to be removed." "Remove the .end." "Put 'u' or '1e-6' after the number describing the length or width."
-
(Image) Hello, I have an issue with the DRC. I don't understand this error. Does anyone have the same problem? I am using drc_sky130.lydrc to check the DRC, but I don't know if it is the best option. Thank you for your help. / This via is genarat…
-
(Image) the name of my substate is V_ss
-
(Image) I did it ! I successfully launched the LVS yesterday, but there were errors. I changed many things, but I don't know where the issue was. The last problem was solved today; I needed to change the substrate name. By default, the name is sky…
-
(Image) Yes ! Sorry, it is not sky130.lvs, it is sky130.lylvs
-
(Image) some tims when I launch the LVS I have this
-
Hi Matthias I successfully extracted the netlist and found the problem. The issue was with the comment on line 31 in the sky130.lvs file. The question is, why are there issues in the comment section? Now that I have resolved the issue I am happy, th…
-
(Image) Hello everybody, I have another issue. I'm trying to make an LVS, but I have a problem with my netlist extraction. I did 'Tools -> Trace_All_Net,' and I have this. I don't know what it is, but it's not the netlist corresponding to the …
-
Thank you very much for you help <3
-
why I don't know !? I did the same thing again and again et voilà ...
-
(Image) It works
-
I wanted to say thank you for your response. Perhaps there is an impact as I am using Debian on a virtual machine.
-
(Image) You can see the layout I made using OpenLane with a Verilog file on the Sky130 PDK. I installed OpenLane and completed it within a day. However, unfortunately, in one month, I was unable to configure KLayout to integrate the library conta…
-
I did what you said, I have no library skywater130 - sky130 Pce